System Software - Cradlepoint MBR1400 Product Manual

MBR1400| USER MANUAL Firmware ver. 3.5.0
CRADLEPOINT

8.7 System Software

Firmware Upgrade allows the administrator to
load new firmware onto the router to add new
features or fix defects. If you are happy with the
operation of the router, you may not want to
upgrade just because a new version is available.
Check the firmware release notes for information
to decide if you should upgrade or not.
Current Firmware Version: Shows the number of
the current firmware and the date it was updated.
Available Firmware Version: If there is a new
firmware version available, this will list the version
number. Click ―Check Again‖ to have the router
check the newest firmware.
Factory Reset: Set default settings to match the
new firmware. This is safest, as settings may have changed. You should back up your current settings and restore them
after the new firmware is loaded.
Automatically check for new firmware: Check for an available firmware update once a day.
Automatic (Internet): Have the router download the file and perform the upgrade with no user interaction.
Manual Firmware Upload: Upload the router firmware from an attached computer.
8.7.1 System Config Save/Restore
Backup Current Settings: Click on ―Save to disk‖ to save your current settings to a file on a computer.
Restore Settings: Click on ―Upload from file‖ to restore your previous settings from a file on a computer.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 168