Wiring; Interconnection - Furuno FCV-1150 Installation Manual

2. WIRING

2.1

Interconnection

Refer to the interconnection diagram at the back of this manual for detailed information.
Display unit rear panel
(connector cover removed)
NavNet 3D
100/110/115/
220/230 VAC
φ
1 , 50/60 Hz
Speed/
Water temperature
sensor
Rectifier
PR-62
Satellite
compass
12-24 VDC
(Connect to a dedicated
breaker in the power
distributor.)
: Standard supply
: Option
: Local supply, External device
Wiring diagram for FCV-1150
Navigator
High
Transducer *
*: This unit cannot accept transducers of
53 to 65 kHz, 111 to 139 kHz and 171
to 183 kHz.
5
IV-2.0sq
Grounding wire:
As short as possible
Low
*
Transducer