Brickcom NR-1604 \ User Manual page 60

3.3.3 Event Triggers
This section can be used to finish event configuration by setting:
•
Which channels will have event trigger function enabled,
•
What is considered to be an event, and
•
Where the warnings will be sent to and how they will be sent.
Select Channels to Enable Event Trigger and Which Type of
Event Should be Triggered
•
Check the boxes to enable the event trigger for desired channels
•
Define which system events should trigger the recorder to send out
notifications
•
Define how a n d wh ere notifications
Note: Event trigger may not work for cameras that are placed outside of the local
network or on the Internet until the "UPnP Port Forwarding" is enabled in both the
NVR and the router.