3.1.5 Disk Setup
For instructions to install a hard disk in the NR-1604, refer to page 9.
Once a hard disk has been installed in the NVR-1604, it must be initialized in
preparation for recording. Basic information about the installed hard disk can
be viewed under Disk Setup.
To initialize it, click the "Format" button
The firmware can be upgrading through the recorder's external USB thumb
drive.
To obtain detailed information about the disk, open the path: "System
Options" >> "Disk Status".
Need help?
Do you have a question about the NR-1604 \ and is the answer not in the manual?