Furuno CSH-8L Installation Manual page 14

1. MOUNTING
5. After screwing the transducer into the main shaft, fasten two socket-screws (M6x10,
supplied).
Socket-set screw
Rotate trans-
M6x10, 2 pcs.
ducer to screw in
main shaft.
6. Clean the top of the shaft with alcohol, install the waterproofing attachment and apply
Lock-tight (supplied) to the socket screw.
Waterproofing
attachment
1-6
Coat 50 mm of shaft
with grease.
50mm 140mm
Hold here with pipe wrench.
Fastening main shaft to transducer
M6 socket-set screw
(Apply Lock-tight.)
Cleaning the shaft
Note: Screw shaft 50 mm
30 mm
Clean with alcohol
here.
Waterproofing
attachment
into transducer flange.
Shaft