Table of Contents
Advertisement
Multi-CD Player
Introduction of advanced
multi-CD player operation
1
1 Function display
Shows the function names.
1
Press A.MENU to display MENU.
FUNCTION and SETUP appear on the display.
2
Use a, b and A.MENU to select
FUNCTION.
Press a/b to change the menu option; press
A.MENU to select the menu option.
The menu option selected with a/b is dis-
played with a frame.
The function names are displayed and oper-
able ones are highlighted.
3
Use a, b, c, d and A.MENU to select
the desired function.
Press a/b/c/d to change the function; press
A.MENU to select the function.
The function selected with a/b/c/d is dis-
played with a frame.
# To go to the next group of function names,
press c to select NEXT and then press A.MENU.
# To return to the previous group of function
names, press c to select PREV and then press
A.MENU.
# To return to the previous display, press BACK.
# To return to the display of each source, press
BAND/ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
There are three repeat play ranges for the
multi-CD player: M-CD (multi-CD player re-
peat), TRACK (one-track repeat) and DISC
(disc repeat).
1
Use a, b, c, d and A.MENU to select
REPEAT.
2
Press c or d to select the repeat range.
! M-CD Repeat all discs in the multi-CD
player
! TRACK Repeat just the current track
! DISC Repeat the current disc
Notes
! If you select other discs during repeat play,
the repeat play range changes to M-CD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to DISC.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range, M-CD
and DISC.
1
Select the repeat range.
Refer to Repeating play on this page.
2
Use a, b, c, d and A.MENU to select
RANDOM.
Section
07
19
En
Advertisement
Table of Contents
