Table of Contents
Advertisement
Section
06
TV tuner
Watching the television
1
2
Only when using this unit with MASTER
mode (M), you can perform the following
operations by this unit.
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the TV tuner is tuned to.
3 Preset number indicator
Shows which preset has been selected.
4 Channel indicator
Shows which channel the TV tuner is tuned.
5 Preset list display
Shows the preset list.
1
Press AV SOURCE to select the TV.
Press AV SOURCE until you see TV displayed.
2
Press BAND/ESC to select a band.
Press BAND/ESC until the desired band is dis-
played, TV1 or TV2.
3
To perform manual tuning, briefly press
c or d.
The channels move up or down step by step.
16
En
3
5
# You can also perform manual tuning by press-
ing CHANNEL.
4
4
To perform seek tuning, press and hold
c or d for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
either c or d.
# If you press and hold c or d you can skip
broadcasting channels. Seek tuning starts as
soon as you release the button.
Advertisement
Table of Contents
