Displaying The Screen For Av System Settings; Setting Video Input 1 (Av1) - Pioneer AVIC-Z140BH Operation Manual

Customizing preferences
p Touching [Source] while adjusting the rear
view camera image returns you to the pre-
vious screen.
p The adjustments of "Brightness" and
"Contrast" are stored separately when your
vehicle's headlights are off (daytime) and
when your vehicle's headlights are on
(nighttime). These are switched automati-
cally depending on whether the vehicle's
headlights are on or off.
p The adjustments of "Dimmer" is stored se-
parately when your vehicle's headlights are
off (daytime) and when your vehicle's head-
lights are on (nighttime). "Dimmer" is
switched automatically only when the value
of nighttime is lower than the value of day-
time.
p You cannot adjust "Color" for the source
without a video and navigation map display.
p The setting contents can be memorized se-
parately for the following screen and the
video image.
! Audio source
— AM/FM/Tuner or HD Radio/CD/
ROM/iPod (Music)/SD (audio)/USB
(audio)/Bluetooth audio/XM/
SIRIUS/Pandora/aha/EXT1 (audio),
EXT2 (audio)/source off screen/
menu screens/others
! Video source
— AV1 and iPod (Video)
— DVD-V and DivX
— SD (Video) and USB (Video)
— AV2 (Video) and EXT1 (Video), EXT2
(Video)
— Rear view camera image
! Map screen
p The picture adjustment may not be avail-
able with some rear view cameras.
p Because of the LCD screen characteristics,
you may not be able to adjust the screen at
low temperatures.
3 Touch [+] or [–] to adjust the desired
item.
Each touch of [+] or [–] increases or decreases
the level of the desired item.
4 Touch .
The previous screen returns.
Displaying the screen for
AV system settings
1 Press the HOME button to display the
"Top Menu" screen.
2 Touch [Settings].
The "Settings Menu" screen appears.
3 Touch [AV Settings].
The "AV System Settings" menu appears.
4 Touch the item that you want to
change the setting.
# If you touch , the previous screen returns.

Setting video input 1 (AV1)

You can switch this setting according to the
connected component.
p This setting applies to mini-jack input.
Chapter
31
177
En