Stamp/Composition] Tab - Konica Minolta Bizhub 652 User Manual

8.4 Parameter details
Function Name
[Transparency In-
terleave]
[Interleave Tray]
Reference
- The [Front Cover from Post Inserter]/[Back Cover from Post Inserter] function is available only if the op-
tional Post Inserter PI-505 is installed.
- [Front Cover from Post Inserter] and [Front Cover] or [Back Cover from Post Inserter] and [Back Cover]
cannot be specified at the same time.
8.4.6

[Stamp/Composition] tab

Function Name
[Watermark]
[Edit...]
[Overlay]
[Edit...]
bizhub 652/552
Option
[Paper Tray]
[Staple]
ON/OFF, [Blank]
Tray 1 to Tray 4, LCT
Option
ON/OFF
-
[None]
[Create Host Image]
[Print Host Image]
[Print Device Image]
-
Description
Specify the paper tray to be used from the [Change
Settings] drop-down list.
From the [Change Settings] drop-down list, specify the
number of staples and the stapling position.
Select this check box to insert interleaves when printing
transparencies.
It can be specified when [Transparency] is selected for
Paper Type.
Select the paper tray for the transparency interleaves.
Selectable items vary depending on the option installa-
tion status.
Description
Select this check box to print the document with a wa-
termark (character stamp) overlapped. Clicking [Edit...]
allows you to create, change, or delete watermarks.
For details, refer to page 8-21.
The overlay function is not used.
Printing the original with this setting creates the overlay
data. Created data is saved in the computer.
Select this option to print the original on top of the over-
lay data created with [Create Host Image].
Selecting this setting displays the overlay data stored in
the computer in the list below, allowing you to select it.
Clicking [Edit...] allows you to specify the overlay print-
ing conditions.
Select this option to print the original on top of an over-
lay data of the machine.
Clicking [Edit...] allows you to specify the overlay data
and conditions registered in this machine.
For details, refer to page 8-22.
8
8-19