Konica Minolta Bizhub 652 User Manual page 84

8
Item Name
[Obtain Device Informa-
tion]
[Obtain Settings...]
[Encryption Passphrase]
[Software Tools]
Reference
- The machine type and option in [Device Option] are specified automatically if [Obtain Settings...] is set
to [Auto]. If [Auto] is not enabled, be sure to specify the machine and option manually or using [Obtain
Device Information].
- When [Secure Print Only] is set to [On] in [Device Option], only the secure print jobs are allowed. For
details on secure printing, refer to page 11-6.
- In [Encrypt. Passphrase], enter the encryption passphrase that matches the one that configured in [Driv-
er Password Encryption Setting] of the machine.
- The function of [Acquire Device Information] is available only when your computer is connected to and
can communicate with the machine. To use [Acquire Device Information], in [Administrator Settings] of
this machine, set [System Connection] - [OpenAPI Settings] - [Authentication] to [OFF]. For details, refer
to page 12-55.
- If [Password to Acquire Device Information] is selected in [Obtain Settings...], check that the password
matches that specified in [Assign Account to Acquire Device Info] of this machine. Specify the pass-
word using up to eight alphanumeric characters, excluding spaces and """.
d
Reference
For details on allowing the user to specify [Encrypt. Passphrase], refer to page 11-33.
For details on [Assign Account to Acquire Device Info] of this machine, refer to page 12-53.
8-6
Functions
Click this button to communicate with this machine and load the status of the
installed options.
Click this button to configure conditions such as the destination when you
perform [Acquire Device Information].
When automatically acquiring device information, enable [Auto]. If necessary,
you can select [Entert Password to acquire Device Information] and specify
a password for authentication to acquire device information. This then per-
forms password authentication when acquiring device information.
Any string used to encrypt communication with this machine.
If the encryption passphrase for the machine was changed from [Use Factory
Default] to [User-Defined], enter the same encryption passphrase as for the
machine. An encryption key is automatically created for the entered text, and
used for communication with the machine.
Allows you to start up the software tools such as PageScope Web Connec-
tion.
Default settings of the printer driver 8.2
bizhub 652/552