Before First Use; Operating Instructions; User Maintenance Instructions - Bella Snow cone maker Instruction Manual & Recipe Manual

Hide thumbs Also See for Snow cone maker:
Table of Contents

Advertisement

Available languages

Available languages

Before First Use

1. Carefully unpack the Bella Snow Cone Maker and remove all packaging
materials. Check the contents to ensure that all parts and accessories
are present, and have been received in good condition.
2. Handle the shaving blade with caution. WARNING: Do not touch blades.
Blade attachments are very sharp. Use extreme care when handling.
Failure to do so can result in personal injury.
3. Wash the ice shaver bowl carefully. Rinse and dry thoroughly.
WARNING: DO NOT IMMERSE THE MOTOR IN WATER.

Operating Instructions

1. Fill your regular Ice tray with water and place it on the freezer until
the ice cubesare completely frozen. Standard Ice Cubes work well in
the Ice shaver.
2. Place the ice shaver bowl on top of the base, align the tabs with the slots
and gently press down until the shaver bowl locks into place. Make sure
the dots are properly aligned. The Shaver bowl should not be removed
after it is locked into place.
3. When the cubes are completely frozen, remove from the tray and place
them into the ice shaver bowl.
4. Do not fill ice over the MAX Line, if the ice shaver bowl is overfilled, the
unit will not work properly.
5. To use the included paper cone cups, place the cone cup holder into the
base opening and make sure it is properly locked. To use larger bowls,
remove the cup holder and place it on the base of the ice shaver.
To remove the cone cup holder, gently lift up the cup holder in one
single movement. Note: Please do not attach the cup holder if you are
using a large bowl.
6. Place the shave motor on top of the ice, plug into the electrical outlet
and press and hold down the power button. The unit will start working
and it will start shaving the ice. To stop the unit, just remove hand from
the top button.
7. The snow cone maker will switch off automatically once shaving the ice
has been completed.
8. The unit will not work if there is no ice in the shaver ice bowl.
9. Add your favorite syrup and serve.
10. Unplug the unit immediately after use.

User Maintenance Instructions

This appliance requires little maintenance. It contains no user-serviceable
parts. Any servicing requiring disassembly other than cleaning must be
performed by a qualified appliance repair technician.
6

Advertisement

Table of Contents
loading

Table of Contents