Technical Data - Jonsered GR 2026 L Operator's Manual

Technical data

Technical data
Engine
3
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, litre
Weight
Weight without fuel, cutting attachment and guard, kg
Noise emissions
(see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
Sound levels
(see note 2)
Equivalent sound pressure level at the operator's ear,
measured according to EN ISO 22868, dB(A), min./max.:
Vibration levels
Vibration levels at handles, measured according to
2
EN ISO 22867, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator's ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
TECHNICAL DATA
GR 2026L/CL
26,9
35
28
2700
11000-11700
10000
0,9/9000
Yes
Yes
Walbro CD
NGK BPMR 7A/
Champion RCJ 7Y
0,5
Walbro WT
0,5
L: 5,7 CL: 6,0
107
dB(A) 108
WA
95/99
2,8/2,0
2,8/2,0
2,6/2,8
5,0/5,0
GR 2032L
30,8
35
32
2700
11000-11700
10000
1,1/8400
Yes
Yes
Walbro CD
NGK BPMR 7A/
Champion RCJ 7Y
0,5
Walbro WT
0,5
6,2
110
110
92/100
2,5/2,3
4,0/3,0
3,8/2,7
6,8/3,4
) in conformity with EC directive 2000/14/EC.
WA
– 23
English