3.3.3 Removing the speaker terminal board
(See Figs.5 and 6)
• Remove the amplifier assembly.
• Remove the rear panel.
(1) From the back side of the amplifier assembly, remove the
two screws F attaching the AC bracket. (See Fig.5.)
(2) Disconnect the wires from the connectors
CN102
on the speaker terminal board. (See Figs.5 and 6.)
(3) Disconnect the speaker terminal board from the connec-
tors (CN501, CN503, CN504) on the mother board. (See
Fig.6.)
1-28 (No.MB075)
Speaker terminal board
CN101
and
CN101
CN102
F
CN102
Amplifier assembly
AC bracket
F
Fig.5
CN101
Speaker terminal board
Fig.6
CN501
CN503
CN504
Mother board