3.1.3 Removing the DVD changer mechanism assembly
(See Fig.7)
• Remove the metal cover.
• Remove the front panel assembly.
(1) From the top side of the main body, disconnect the card
wires from the connectors (CN405, CN415) on the main
board.
(2) Remove the four screws E attaching the DVD changer
mechanism assembly to the bottom chassis.
(3) Take out the DVD changer mechanism assembly in an up-
ward direction.
Note:
When attaching the screw E, fit the hole of the DVD changer
mechanism assembly to the bosses d on the bottom chassis.
3.1.4 Removing the rear panel
(See Fig.8)
• Remove the metal cover.
(1) From the back side of the main body, remove the screw F,
nine screws G and three screws H attaching the rear panel.
1-10 (No.MB075)
DVD changer mechanism
assembly
E
E
Boss d
E
Fig.7
F G
H
G
H
Fig.8
Main board
Boss d
CN405
CN415
Card wires
Bottom chassis
H
Rear panel