Care And Cleaning - Zanussi ZKG 2125 User Manual

6. Start the programme by pressing button 7 . After the
programme has started, the time remaining is upda-
ted every minute.
7. At the end of the programme the buzzer sounds. A
flashing zero « » appear on the display. At this
point of the programme, starts an anti-crease phase
which lasts about 10 minutes. During this time the
door is locked and the display keeps showing the

Care and cleaning

Warning! You must DISCONNECT the appliance
from the electricity supply, before you can carry out
any cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good idea
to periodically use a water softening powder in the ma-
chine. Do this separately from any laundry washing, and
according to the softening powder manufacturer's in-
structions. This will help to prevent the formation of lime
deposits.
External cleaning
Clean the exterior cabinet of the appliance with soap and
water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by
pressing the catch down-
wards and by pulling it
out. Flush it out under a
tap, to remove any traces
of accumulated powder.
16
To aid cleaning, the top
part of the additive com-
partment should be re-
moved.
flashing zero « ». (If you wish to open the door
before or during the anti-crease phase, please follow
the instructions given in the previous chapter).
8. Turn the selector dial to the
the machine off.
9. Remove the laundry.
Cleaning the drawer recess
Replace the drawer and run the rinse programme with-
out any clothes in the drum.
Drain pump
The pump should be inspected regularly and particularly
if:
• the machine does not empty and/or spin
• the machine makes an unusual noise during draining
due to objects such as safety pins, coins etc. blocking
the pump.
Proceed as follows:
• disconnect the appliance.
• if necessary wait until the water has cooled down.
1
position to switch
Having removed the draw-
er, use a small brush to
clean the recess, ensuring
that all washing powder
residue is removed from
the upper and lower part of
the recess.
Open the pump door lev-
ering on the groove with a
coin (or with the suitable
tool, that you can find in
the bag containing the in-
struction booklet, de-
2
pending on the model).