Table of Contents
Advertisement
28
www.zanussi.com
11.
CARE AND CLEANING
WARNING!
You must DISCONNECT the appliance
from the electricity supply, before you can
carry out any cleaning or maintenance
work.
11.1 External Cleaning
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
CAUTION!
Do not use alcohol, solvents or
chemical products.
11.2 Descaling
The water we use normally contains lime.
It is a good idea to periodically use a
water softening powder in the machine.
Do this separately from any laundry
washing, and according to the softening
powder manufacturer's instructions.
This will help to prevent the formation of
lime deposits.
11.3 After Each Wash
Leave the door open for a while. This
helps to prevent mould and stagnant
smells forming inside the appliance.
Keeping the door open after a wash will
also help to preserve the door seal.
11.4 Maintenance Wash With
"Tub Clean" Program
With the use of low temperature washes
it is possible to get a build up of residues
inside the drum.
We recommend to use "Tub Clean"
program to clean the drum regularly to
remove any residue.
To run a maintenance wash:
The drum should be empty of laundry.
Select the "Tub Clean" program.
Press Start/Pause to start the program.
11.5 Cleaning The Dispenser
Drawer
The washing powder and additive
dispenser drawer should be cleaned
regularly.
Remove the drawer by pressing the
catch downwards and by pulling it out.
To aid cleaning, the top part of the
additive compartment should be
removed.
Advertisement
Chapters
Table of Contents
