Operating Your Lifebook Security/Application Panel - Fujitsu LifeBook E7010 User Manual

Setting Passwords
When shipped from the factory, no passwords are set. You have a choice of having no password
or setting a supervisor and user password. You must set the supervisor password before the user
password.
Critical Point
The purpose of supervisor password is to be able to bypass the user password in case the
user password is forgotten. The supervisor password alone will not lock the system.
You have to set both the supervisor and user passwords for the security panel to work.
Setting Supervisor Password
You must have set a supervisor password before setting any user passwords. The supervisor
password can bypass the user password.
1. Go to the Start menu.
2. Click on Run.
3. Type in FJSECS.EXE, then press [Enter].
4. Follow the on-screen instructions to set the Supervisor password.
Setting User Password
1. Go to the Start menu.
2. Click on Programs.
3. Click on Security Panel Application and Set User Password.
4. Follow the on-screen instructions to set the User password.
Critical Point
You may change or remove the supervisor or user password by repeating the steps defined
above.

Operating your LifeBook Security/Application Panel

The security lock feature is in effect both when the system resumes from Off or suspend
state. You always need to push the buttons to input the user password. Your system will not
begin the boot sequence without entering your supervisor/user password.
From Off State
1. Turn on your system.
2. When the Security Indicator flashes, enter the password and press Enter button. For example,
if the password is 22222, Press Button Number 2 five times and press Enter button.
The LifeBook will boot to normal operation.
60