Table of Contents
Advertisement
5. Connect the AC adaptor to the computer and switch on its power.
Critical Point
When you switch on the power for the computer after connecting the external display, the
following may occur.
• The computer's LCD display and the external display may be displayed on at the same
time.
• The "Add new hardware wizard" may be displayed. In this case, install the driver for the
external display according to the instructions on the screen.
Separate the external display from the floppy disk drive and other units that generate magnetic
fields.
6. Switch the screen display.
Pressing the "Fn" + "F10" keys at the same time switches the display LCD display → CRT → Both
→ LCD display... You can also switch the display with the operating system "Display properties".
40
Advertisement
Table of Contents
