Table of Contents
Advertisement
5. Install the cover.
Install the screws removed in Step 3.
6. Install the internal battery pack.
Step 4 of "Replacing the Battery Pack".
IMPORTANT
• If the memory is not installed correctly, when you switch on the power, the "Expansion memory
error" message may be displayed or nothing at all may be displayed on the screen. If that
happens, switch off the power and re-install the memory.
Removing Memory
1.
Switch off the power for the computer and disconnect the AC adaptor.
2. Remove the internal battery pack.
Steps 1-3 of "Replacing the Battery Pack" .
3. Remove the cover.
Remove the screw on the bottom of the computer, then remove the cover.
31
Advertisement
Table of Contents
