Table of Contents
Advertisement
1. Set the PC card in place.
Insert the PC card into the PC card slot with the product name facing upward.
PC card
2. If this is the first time that this PC card has been loaded in this computer, install any
required drivers.
Some PC cards require the drivers be installed. Check the manual for the PC card and install any
required drivers.
Critical Point
Handle any section where a cord connects to the PC card very carefully. Do not place anything
on this connector section or bump it. Rough handling of the connector section can break the
PC card.
Removing PC Cards
This section explains the method for removing PC cards for each operating system.
Critical Point
When removing a PC card that has a cord, do not hold on the PC card cord. Doing so can
break the PC card.
When removing a PC card, use the following procedure. Failure to follow this procedure can
cause breakdown.
Some PC cards require that the power be switched off before they are removed. Check this
in the manual for the PC card.
26
Advertisement
Table of Contents
