Mounting Bracket Installation - Westinghouse Cumulus Owner's Manual

ETL-ES-Cumulus-WH13

MOunTinG BraCKET inSTaLLaTiOn

inSTaLaCión COn SOPOrTE dE MOnTajE
3
1
2
2
1
Remove the screws from the two mating holes (1) on the canopy. Loosen (do not remove) the screws in the mating slots (2) on the canopy. Rotate the mounting bracket and remove
from the canopy.
Quite los tornillos de los dos orificios coincidentes (1) del dosel. Afloje (no quite) los tornillos de las ranuras coincidentes (2) del dosel. Gire el soporte de montaje y sepárelo del dosel.
6