Maintenance - Chicago Electric 69343 Owner's Manual & Safety Instructions

Maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn:
Make sure that the trigger is in the off-position and unplug the tool from its electrical
outlet before performing any inspection, maintenance, or cleaning procedures.
tO preVent SeriOuS inJury FrOM tOOL FaiLure:
Do not use damaged equipment. if abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1� BeFOre eacH uSe, inspect the general
condition of the tool� Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation�
Page 12 For technical questions, please call 1-888-866-5797.
2� aFter uSe, wipe external surfaces
of the tool with clean cloth�
3� WarninG! if the supply cord
of this power tool is damaged,
it must be replaced only by a
qualified service technician.
Item 69343