Error/Alarm Display Area; Recorder Control Buttons; System Control Buttons - Panasonic WJ-RT416 Network Operating Instructions

Error/alarm display area

The status of the current login recorder will be displayed with the error status icons and the alarm status icon.
When the [ALM] icon is clicked, the alarm will be reset, and the displayed icon will disappear.
Refer to the operating instructions of the recorder for further information about the alarm reset.

Recorder control buttons

Login
Login/logout the recorder, operation of the recorder, download of recorded images and remote talk between the PC
and the recorder can be made using these buttons.
Some operations cannot be made if logged in the recorder not as "Manager". Refer to the installation guide for fur-
ther information about the operation restriction differences between the user levels. Refer to page 19 for how to log
in the recorder.
The following are available using the recorder control buttons.
• Login/logout ( page 19)
• Configurations of the recorder ( page 35)
• Download of recorded images ( page 47)
• Remote talk (start/end) ( page 48)

System control buttons

Starting of each function of the monitoring software, displaying of the setup menu, etc. can be made using these but-
tons.
The following are available using the system control buttons.
Monitor System Setup Sequential Display
Frame Display
My Favorite Display
• Configuration of the settings of the monitoring software ( page 49)
• Frame display (Function to display only I-Frame of MPEG-4 stream) ( page 30)
• Sequential display (Function to display images from a camera to camera sequentially at the interval set in
advance) ( page 32)
Logout Data Download
Recorder Config.
Map RT4Viewer
Control Panel
Remote Talk
Exit
Minimize
9