Table of Contents
Advertisement
Menu Operation
ATR (Adaptive Tone Reproduction) Setting
Adaptive Tone Reproduction is the mapping of scene
luminance and color to print reflectance or display
luminance. It is order to reproducing brightness properly
and brightness differences.
1.
Select [ATR] option and use [LEFT] or [RIGHT] button
to select ON or OFF.
2.
Use [LEFT] or [RIGHT] button to select a mode then
press [SET].
•
LUMINANCE: You can select the Luminance limit.
•
CONTRAST: You can select the Contrast limit.
26
NR Setting
If you select high value, you can reduce the more noise.
When you use this function, the afterimage may occur.
1.
Select [NR] option. If pictures are not clear due to
brightness, this option reduce the noise of picture.
2.
Use [LEFT] or [RIGHT] button to select the option.
•
NR Mode: You can select the filter mode of
2D-DNR.
>
Y LEVEL: If you select the Y Level, you can set
the Y basic filter for 2D-NR.
>
C LEVEL: If you select the C Level, you can set
the C basic filter for 2D-NR.
Advertisement
Table of Contents
