Intermittant Control System Wiring Diagram - White Mountain VFP24FP2 Series Installation Instructions And Owner's Manual

INTERMITTANT CONTROL SYSTEM WIRING DIAGRAM

If any of the original wire as supplied with this unit must be
replaced, it must be replaced with equivalent gauge and tem-
perature rated wire.
This appliance is only for use with the type of gas indicated
on the rating plate and may be installed in an aftermarket,
permanently located, manufactured (mobile) home where not
prohibited by local codes. This appliance is not convertible for
use with other gases.
Do not operate the appliance with panel(s) removed, cracked
or broken. Replacement of the panel(s) should be done by a
licensed or qualified service person.
Improper installation, adjustment, alteration, service or mainte-
nance can cause property damage, personal injury or loss of
life. Installation and service must be performed by a qualified
installer, service agency or the gas supplier.
Page 24
CAUTION
WARNING
30411-9-0714