Operation And Important Riding Points; Starting A Cold Engine - Yamaha YW50Z Owner's Manual

Starting a cold engine<IXE>
Read the Owner's Manual carefully to
become familiar with all controls. If there
is a control or function you do not un-
derstand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with the
controls can lead to loss of control,
which could cause an accident or in-
jury.

OPERATION AND IMPORTANT RIDING POINTS

OPERATION AND IMPORTANT RIDING POINTS
EAU15951

Starting a cold engine

NOTICE
See page 5-4 for engine break-in in-
EWA10271
structions prior to operating the ve-
hicle for the first time.
ENGINE STOP
ZAUM00**
1. Engine stop switch "#/$"
1. Set the engine stop switch to "#".
2. Turn the key to "*", and when the oil
level warning light comes on, turn
it to "ON".
EAUT2762
3. Close the throttle completely.
ECA10250
ZAUM00**
1. Kickstarter lever
4. While applying the front or rear
1
5-33 5-1
brake, start the engine by pushing
the start switch or by pushing the
kickstarter lever down. NOTICE:
For maximum engine life, never
accelerate hard when the engine
is cold!
[ECA11041]
If the engine fails to start by push-
ing the start switch, release the
switch, wait a few seconds, and
then try again. Each starting at-
tempt should be as short as pos-
sible to preserve the battery. Do not
crank the engine more than 5 sec-
onds on any one attempt. If the
engine does not start with the
EAU15943 EAU15943
1
2
3
1
4
5
6
7
8
9