Initial Camera Setup - Ikelite 6170.30 Instruction Manual

Initial Camera Setup

- Set Mode Dial to "A" Aperture Priority. Manually adjust aperture setting
to achieve the best exposure for your shooting conditions. The shutter
speed will be locked at 1/60th second. Set Mode Dial to "M" Manual
mode to manually adjust both aperture and shutter speed settings.
- Set Flash to "Forced Flash On
- In Setup Menu:
Insert and Format an SD or SDHC memory card.
In Clock Set, set Date and Time.
Set Monitor Display to desired brightness level.
Set Monitor Luminance to "Power Monitor."
In Economy, set Auto Power Off to "5MIN" and Monitor Power
Save to "OFF."
Set Auto Review to "HOLD."
- In Rec Menu:
Set Aspect Ratio to "4:3."
Set Picture Size to "18M" and Quality to "Fine."
Set ISO Sensitivity to "200" and White Balance to "AWB." For best
results, manually set white balance for each working depth.
Set AF Mode to "1-Area" and Quick AF to "ON."
Set Face Recog. to "OFF."
Set Metering Mode to "Center Weighted."
Set i.Exposure and i.Resolution and Digital Zoom to "OFF."
Set Burst, AF Assist Lamp and Red-Eye Removal to "OFF."
Set Image Stabilizer to "ON."
NOTE: If overexposure occurs at a desired aperture setting, use "-"
exposure compensation, back away from your subject and zoom in.
When using an AF35 strobe or manual controller, turn the power down.
4
(before placing camera in housing)
" and Macro Mode to "AF Macro"