Sms - Digitus ADVANCED HD NETWORKFIXED DOME CAMER User Manual

Function
Test

3.2.7 SMS

Note: Before using this function, you need to apply an API ID from the mobile messaging company,
Clickatell, and you will be charged starting from the 11
"APPENDIX 4 API ID APPLICATION FOR SMS MESSAGING" at page 26.
Enter the detailed information needed for text messaging, and click "Save" to confirm. The information you set
here will be applied when "SMS" is selected in "General" → "Trigger".
Function
System
User name / Password
API ID
Recipient
Transfer Interval
Reset Counter
Message
Test
Description
When all information is entered, click "Test Mail" to try if the receipt.
Description
The text messaging service provider is Clickatell.
Enter the account user name and password you created in Clickatell.
Enter the API ID you applied from Clickatell.
Click "Add" to enter the phone number, including the country code, to receive the text
message. Five sets of phone numbers are allowed.
Set the interval time in minutes between two-message sending.
The options are 0, 15, 30 & 60.
Click to restart the text messaging, and the SMS will be sent after the specified time interval
since you click this button.
Enter the text content (up to 70 characters) you want to send with the text message.
To know whether your SMS setting is correct, click this button to immediately send a SMS to
your phone.
Note: This testing is not free and you will be charged for SMS sending base on your
local rate.
th
message. For details, please refer to
10