CHARLY OPERATING INSTRUCTIONS
15.4. Light bulb replacement in the headlight
CAUTION
Disconnect the battery before removing the covering to replace the
light bulbs.
To disconnect the battery, proceed in the following sequence:
- Unplug the plug connections on the battery (fig. 18).
- Turn the master switch and the lights ON until all LEDs go out.
- Turn the master switch OFF.
3
Attention!
Prior to removing the top covering, pull out the battery plug to disconnect the
battery! Then, turn the master switch and the lights ON until all LEDs go out. Turn
the master switch OFF again.
Unscrew the top covering.
Snap off the light bulb fitting (1), and remove the light bulbs (2) backwards. Install the new
light bulb in reverse order.
CH2002B16
21
Fig. 16: Light bulb replacement
Light bulb fitting
Bulbs
Headlight housing. bottom
ENGLISH