Speedometer - MZ GmbH CHARLY Operating Instructions Manual

CHARLY OPERATING INSTRUCTIONS
• Reduce speed
DANGER!
Braking will lead to a strong vehicle slowdown.
Braking strongly and on one side only may affect CHARLY's riding
stability.
When braking, always use the front and rear wheel brakes carefully
and both at the same time.
After taking over the vehicle, please try out the effect of braking
outside of public roads.
Rotate the turning handle toward the dashed line (SLOWER), and use the brakes to slow
down.
For braking, both brakes must be actuated always at the same time. Right brake lever
for front wheel brake, left brake lever for rear wheel brake
Attention! The brakes will lead to a very strong slowdown of the vehicle. So, please
always use the brakes moderately and never actuate the front wheel brake
alone as a crash might be the consequence.
• Driving with the lights ON (see figure 5)
Use the toggle switch (5) to actuate both headlights and the taillight when the master
switch is ON.
• Horn (see figure 5)
The horn button (2) is located under the speedometer at the left handlebar end. The horn
only works when the master switch is ON.

4. Speedometer

On the speedometer, you can check the speed and the distance covered or mileage.
Before putting CHARLY into operation, insert the enclosed battery into the speedometer,
and adjust the speedometer. See the enclosed speedometer operating instructions for an
explanation of the steps needed to set the speedometer.
Enter a wheel circumference of 0790 (0.79 m) for CHARLY.
9
ENGLISH