MZ GmbH CHARLY Operating Instructions Manual page 51

CHARLY OPERATING INSTRUCTIONS ENGLISH
1
6
2
Fig. 12: Rear fastening cam
Chaug5a
Put the seat support to the full upright position.
Swing the fastening cam upwards in arrow direction (1) over the fixing strap at the
rear frame.
Tighten the cam lever downwards to the left (arrow 2).
Reinstall and connect the battery if it was removed before transport.
Very important!
Before driving CHARLY again, make certain that the clamping levers used to fasten
steering rod, seat pillar and seat have really been tightened.
If a clamping lever does not hold any longer, turn the nut located below the clamping
cam clockwise by about one turn until a sufficient clamping effect is achieved.
17