Technical Information; Installation Instructions; Before Using Your Refrigerator; Installing The Refrigerator - Summit FF511L Owner's Manual

Before Using Your Refrigerator:


Remove the exterior and interior packing.

Check to be sure you have all of the following parts:

3 wire shelves

1 crisper drawer with glass cover

1 handle with screws and handle seal

2 keys

Before connecting the unit to the power source, let it stand for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation.

Clean the interior surface with lukewarm water using a soft cloth.

Installing the Refrigerator:


This appliance is designed to be free-standing only, and should not be
recessed or built in.

Place your unit on a floor that is strong enough to support the unit when it is
fully loaded. To level your unit, adjust the leveling legs at the bottom.

Allow 5 inches of space between the back and sides of the unit, which will
allow the proper air circulation to cool the compressor and condenser.

Locate the unit away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources
may increase electrical consumption. Extremely cold ambient temperatures
may also affect the unit's performance.

Technical Information

Models:
Capacity:
Electrical Input:
Rated Current:
Power Input:
Refrigerant:
Installation:
Unit Weight:
Unit Dimensions:

Installation Instructions

FF511L (white with solid door)
FF521BL (black with solid door)
SCR450L (white with glass door)
SCR500BL (black with glass door)
4.1 cubic feet
115V AC / 60Hz
1.4A
100W
R134a, 1.75 oz
Free-standing
57 lbs
19.5"W x 21.5"D x 33.3"H
4