Technical Information; Installation Instructions; Before Using Your Appliance; Installing Your Appliance - Summit BRF65S Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Model Numbers

Type

Exterior

Capacity

Electrical Input

Rated Current

Temperature

of Freezer

Refrigerant

Installation

Ship Weight

Unit Dimensions

(W x D x H)

NOTES: * "ADA" models have a 32" height to fit under lower ADA-compliant counters.

Specifications are subject to change without notice.

Before Using Your Appliance:



Remove the exterior and interior packing.



Before connecting the unit to a power source, let it stand for approximately 2 hours.

This will reduce the possibility of a malfunction in the cooling system from handling

during transportation.



Remove the crisper, drip tray and shelves and clean them and the interior surfaces of

the unit with lukewarm water using a soft cloth.

Installing Your Appliance:



Place the unit on a floor that is strong enough to support the appliance when it is fully

loaded. To level the unit, adjust the two leveling legs at the front.



These models are designed to be built-in, but can also be used free-standing. For

built-in installation, keep ¼" (6.35mm) of space on each side and at the top and 2"

(51mm) at the rear. Take care that the air vent at the front of the appliance is never

covered or blocked in any way



This appliance is supplied with spacers that have to be mounted onto the condenser

tube to make sure there is sufficient clearance between the appliance and the wall.