Installing Your Appliance; Choice Of Location; Before Installation - Mastercook GCF32SI User Manual

2 / INSTALLING YOUR APPLIANCE

Fig. 01

• CHOICE OF LOCATION

Your appliance shoud be flush mounted in the
surface of a support cabinet that is a minimum of
3 cm thick, made of a material that resists heat or
that is covered with such a material.
If a horizontal divider wall is positioned under the
hob, it should be placed between 10 cm and 15 cm
away from the top of the work surface. Never store
aerosol cans or pressurised containers in any
compartment that may exist under the hob (see
chapter " Safety instructions " ).

BEFORE INSTALLATION

•
of your applicance and to ensure leaktightness
between the drawer unit and the work surface,
make sure that you glue the seal provided in the
plastic bag (Fig. 02) .
— Remove the pan supports, the burner covers and
burner heads; noting their positions.
— Turn the hob over and carefully place it on top of
the opening in the cabinet so as not to damage the
knobs and spark plugs.
— Glue the foam seal, supplied with the appliance,
to the outside edge of the frame. This seal ensures
leaktightness between the glass and the work
surface.
— Place your hob in the opening of the support unit,
carefully centering it in the cut-out.
Découpe
meuble
standard
Dimensions
hors tout
au-dessus
du plan de
travail
Dimensions
hors tout
au-dessous
du plan de
travail
— Reposition the pan supports, burner covers and
burner heads.
— Connect the hob's power cable to your kitchen's
electricity supply
connection").
— Connect your appliance to the gas supply (see
section "Gas connection").
Housing
7
APPAREIL
Largeur Profondeur
26,5 cm 49 cm
31 cm 51 cm
26 cm 47 cm
(see section
Joint
EN
Epaisseur
suivant
meuble
5 cm
5,1 cm
"Electric
Fig. 02