Mastercook GCF32SI User Manual page 10

EN 2 / INSTALLING YOUR APPLIANCE
Gas supplied by tank or
•
cylinder (butane/propane)
For your safety, you must choose from the
three following connection options:
— Connection with a rigid pipe made from
copper and with screw-on mechanical
connectors (G1/2 gas standard mark). Make
the connection directly to the end of the
elbow fitted on the appliance.
— Connection with a wavy metal hose
(stainless steel) with screw-on mechanical
connectors (compliant with the NF D 36-125
standard) whose service life is unlimited
(Fig. 01).
— Connection with a reinforced rubber hose
with screw-on mechanical connectors
(compliant with the NF D 36-112 standard)
whose service life is 10 years (Fig. 02).
A
Seal (not provided)
B
Adaptor (not provided)
C
Clamp (not provided)
In an existing system, a soft pipe fitted with
clamps (compliant with the XP D 36-110
standard) whose service life is five years may
be used. It is necessary in this case to use an
adaptor without forgetting to fit a sealing
washer between the adaptor and the hob's
elbow (Fig. 03).
Tip
You can obtain the adaptor and the sealing
washer from your After-Sales Service
Department.
Warning
Screw on the adaptor with a torque
not exceeding 25 N.m.
@ Q
Fig. 01
@ Q
10
Fig. 02