3
Use the number buttons to input a 4-digit password,
then press the ENTER button.
* The set's password
is set to "0000"
by default.
* Do not forget the password.
* The setting
cannot be changed without
Inputting
the correct password.
Remote colntrol unit
Remote control unit
@? When "PASSWORD"
IS selected:
Use the
number
buttons
to input
a 4-dlgit
password,
then press the ENTER button.
$ Do not forget the password.
*The
setting
cannot
be changed
wlthout
Inputting the correct password.
* The set's
password
is set to
"0000"
by
default
Retnote control unit
35