Denon DVD-3800 Operating Instructions Manual page 28
Dvd audio-video player
Hide thumbs
Also See for DVD-3800:
- Operating instructions manual (186 pages) ,
- Service manual (138 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
3
Use the A and v cursor buttons to select the desired settrng, then press
the ENTER button.
@I When "TV ASPECT"
is selected:
4:3
PS
Select this to play wide DVDs in the pan & scan mode (wrth the
sides of the picture cut off).
Discs for which
pan & scan IS not
specified
are played in the letter box mode.
4~3
LB
Select this to play wide DVDs in the letter box mode (with black
strips at the top and bottom).
WIDE (16:9) (Factory default)
Select this to play wide DVDs in the full-screen
mode.
@ When "TV TYPE" is selected:
NTSC
Select this when your TV's video format is NTSC.
If NTSC is selected,
output format is fixed to NTSC.
PAL
Select this when your TV's video format is PAL.
If PAL is selected,
output format is fixed to PAL.
MULTI (Factory default)
Select this when your TV is compatible
with both the NTSC and PAL
formats.
NTSC signals are output from the video output
jacks when discs
recorded
In NTSC format
are played, and PAL signals are output
from the video output lacks when discs recorded In PAL format are
played.
@ When "VIDEO OUT" is selected:
(NOTES)
PROGRESSIVE (Factory default)
Select this when using the DVD-3800 connected
to a progressive
type TV.
INTERLACED
Select this when using the DVD-3800 connected to an interlace type TV.
NOTES:
l
For the component
output
only, it is possible
to switch
between
interlace
image
output
and progressive
image
output.
It is not
possible
to specify
progressive
Image output
for the Video output
connectors
or S-Video output connector.
l
When the progressive
mode is selected,
the interlaced
sound and
picture may be slightly out of sync. To use the interlaced
output, set
the setting to "INTERLACED".
@I When "VIDEO MODE"
IS selected:
VIDEO (Factory default)
This mode is best suited for playing discs containing
video material.
FILM
This mode is best suited for playing discs containing
film material or
video material recorded with the progressive
scan method.
AUTO
The set identifies
the type of material on the disc being played (film
or video) and selects the mode automatically.
This mode is suited
for playing discs containing
both film and video material.
NOTE:
. If stripes of noise appear on the picture or the picture is unclear when
playing a specific DVD video disc, try changing the video mode.
j\
Remote control unit
Remote control unit
28
Advertisement
Table of Contents
