Denon DVD-3800 Operating Instructions Manual page 31

3
@When "MULTI CHANNEL" is selected, use the A and 7 cursor
buttons to select the item to be set, then press the ENTER
button.
SPEAKER CONFIGURATION
Use thus to select the types of the different speakers.
CHANNEL LEVEL
Use this to adfust the output level of the different speakers.
DELAY TIME
Use this to set the distance from the different speakers to the
listenrng positton.
Ji: To exit the SPEAKER SETUP mode
Use the 7 cursor button to select "AUDIO SETUP" then press
ENTER button.
Q When "SPEAKER CONFIGURATION" is selected, use the A and
7 cursor buttons to select the speaker to be set then press the
ENTER button.
l
The type of speaker used for the front speakers, center speaker,
subwoofer and surround speakers can be set. Use the A and v
cursor buttons to select the speaker type, then press the ENTER
button.
LARGE
Select this when a large speaker IS connected.
SMALL
Select this when a small speaker is connected.
NONE
Select thus when no speaker IS connected.
YES
Select this when a subwoofer is connected.
NO
Select thus when no subwoofer is connected.
* Press the RETURN button to return to the "SPEAKER SETUP"
menu.
0 When "CHANNEL LEVEL" is selected, use the A and 7 cursor
buttons to select the speaker to be adjusted, then use the 4 and
) cursor buttons to set the level.
TEST TONE
l
Use the 4 and ) cursor buttons to select off, 2 seconds, 5
seconds or 10 seconds for the test tone, then output the test
tone using the procedure described below.
Front speaker (L)
*The volume level output from the front speakers (left and right
channels), center speaker, surround speakers (left and right
channels) and subwoofer can be adjusted.
*The volume level can be adjusted between 0 and -10 dB In steps
of 1 dB.
* Press the RETURN button to return to the "SPEAKER SETUP"
menu.
ENTER
b
Remote control unit
0
A
4
ä
%ii
v
Remote control unrt
31