Denon DVD-3800 Operating Instructions Manual page 29

@ When "BLACK LEVEL" IS selected:
DARKER
Reduces the standard level of the video output srgnal's black level.
Set this If the image on the TV IS far too bright.
LIGHTER (Factory default)
Sets the vrdeo output srgnal's black level to the standard level.
!& When "SQUEEZE MODE"
IS
selected:
"SQUEEZE MODE" only effectrve for progressive output.
OFF (Factory default)
Set this to display 4:3 video signals over the entire screen of a 16:9
TV.
ON
3
Set thus to display 4:3 video signals in the center of the screen on a
16:9 TV.
0 When "PROGRESSIVE MODE" IS selected:
MODE 1 (level detection mode)
(Factory default)
This is a mode for high precrsron detection of the source type from
the level of the video signals recorded on the DVD.
For DVDs on which the flag (rdentificatron signal) data IS recorded
1
Incorrectly, the picture quality may decrease when flag detection
IS
conducted.
This mode is effective in such cases.
MODE 2 (flag detection mode)
This is a mode for detecting the source type from the source flag
(Identification signal) recorded on the DVD.
In dark scenes, distrngurshing between video signals and noise
signals with level detection is difficult and the prcture quality may
decrease.
This mode is effective In such cases.
* To exit the setup mode
Use the v cursor button to select "EXIT SETUP", then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unrt.
29