Denon DVD-A1UDCI Owner's Manual page 59

Symptom
I
Cause / Countermeasure
I
Page
No return to start-up • There may be an internal error. Set the power to standby, wait -
screen when disc is awhile, then turn the power back on.
removed.
The set cannot be • Aim the remote control directly at infrared sensor window on the 7
operated with the front of the unit
remote control unit. • Operate within a distance of 7 meters from the remote control 7
sensor.
• Remove the obstacle. -
• Replace the batteries with new ones.
7
• Insert the batteries in the proper direction, checking the
Ef>
and 7
e
marks.
• Make the signal code of the remote control match to the signal
7
code of the unit.
The unit is operated • The unit is operated by the remote control of other DENON
7,32
by the remote control products.
of
other DENON • To avoid the unit being operated with the remote control of other 32
products.
devices, set "Other Setup" - "Remote Control Setting" - "Receive
Legacy Remocon" to "Off" on the GUI menu.
Buttons do not work • Operations may not be permitted by the disc. -
or the unit
stops • The safety protection device may be activated. Unplug the power
-
responding. cord once, and wait for 5-10 seconds and then plug it in again.
• Refer to the instructions of the disc.
-
Playable disc is not • The pickup lens may be dirty. Before requesting servicing, try
-
read. cleaning the laser pickup with a commercially available lens
cleaner. (Do not use a cleaner with brush because it may damage
the lens.)
Angle
does
not • If a SD-Video or DVD-Video does not record multiple angles,
49
switch. angle cannot be switched. Also, multiple angles may be recorded
for specific scenes.
Playback does not • Playback may be prohibited by the viewing restriction setting. 31
start when the title is Check the "Ratings" setting on the GUI menu.
selected.
The password
for • On the GUI menu, perform the "Other Setup" - "Initialize"
33
rating level has been procedure.
forgotten.
• Some function may not be used in some operation status and this is not failure of the unit. Read the
description in this Owner's Manual for details on correct operations.
• The volume may differ from disc to disc. This is due to the differences in how the signals are recorded
on the disc, and is not a malfunction.
• During programmed playback, it is not possible to perform random playback or to start playback from
the desired track or file
• Some functions are prohibited on some discs.
ENGLISH
56