Initial Camera Setup; Opening The Housing - Ikelite EOS-40D Instruction Manual

Slr-dc housing for canon eos 40d, 50d
Table of Contents

Advertisement

Initial Camera Setup

-
Insert a fully charged battery.
-
Insert memory card (2GB or greater capacity recommended).
-
Set the mode dial to "M" manual.
-
Set shutter speed to 1/60th second or 1/125th second for fast
moving subjects.
-
Set aperture to F8 for general photography or F22 for macro
photography (close-ups).
-
Set Quality to highest jpeg setting or RAW.
-
Set ISO to 100 and Meter to "center-weighted."
-
Set Review time to 8 seconds.
-
Set White Balance to Auto "AWB."
-
Set auto-focus mode to "One Shot."
-
Set Red-eye On/Off to "OFF."
-
Set Auto power off to 8 or 15 minutes.
-
Set "Highlight Tone Priority" to "Disable" in camera menu C.FnII:image,
screen #3.

Opening the Housing

Lid Snaps have a Lock. To open,
push Lid Snap Lock forward and lift
as shown. Keep pressure on the Lid
Snap so it does not fly open quickly.
Some Lid Snaps have a lot of spring
tension once they go over center, so
have a firm grip on the Lid Snap. Lid
Snaps may be opened one at a time.
6
Push Forward
Lift
Lid Snap Lock

Advertisement

Table of Contents
loading

This manual is also suitable for:

6870.50

Table of Contents