Running Initial Setup; Auto Program - Sony Bravia KDL-46EX600 Operating Instructions Manual

Running Initial Setup

During initial setup, you will perform the following:
• Set the language for the On Screen Display (OSD) text
• Choose your viewing environment
• Scan for digital and analog channels
Complete your cable connections before beginning the Initial Setup. Refer to the Quick Setup
Guide (supplied) for sample connection diagrams.
Initial Setup
Please select your language:
English
Español
Français
Confirm Confirm
3
Auto Program will scan for available channels from the signal source directly connected to
the TV's CABLE/ANTENNA input. Follow the help text provided on the screen to run the

Auto Program.

• When prompted to select Retail or Home, be sure to select
Home for ENERGY STAR compliant mode.
• Select Cancel to stop or cancel the Auto Program. The Auto
Program can be done at later time. To run Auto Program at a
later time, press MENU, select Settings, and then select Auto
Program under Channel settings.
• Connect either your cable or antenna to the TV (you can connect
both using an A-B RF switch (not supplied)); for more details see
page 11.
• Select your preferred aspect ratio for the screen display. Press WIDE to select Wide Mode, or press
MENU and select Settings, and then set Auto Wide to On under the Screen settings. For more
details, see page 27.
18
1
2
V/v/B/b buttons:
Allow you to navigate and highlight options where applicable.
button:
Allows you to select the highlighted option and advance to the next screen.
Turn on the TV. The Initial Setup screen will
appear.
Use the remote control buttons described below to
navigate through the Initial Setup.
nitial Setup
Please select the type of use for th s TV
"Retail" optimizes the picture for store display
"Home" optimizes the picture for normal home
use and is Energy Star comp iant
Reta l
Home
Confirm Confirm RETURN Back