Advertisement
C C o o n n t t r r o o l l P P a a n n e e l l F F u u n n c c t t i i o o n n s s
①
① POWER ON/OFF
COOL MODE : If you psh POWER button, the fan and compressor both operate,
and On Lamp is lighten.
HEAT MODE : If you push POWER button, you can select ON/OFF.
※ At HEAT mode, you can't use FAN, Timer, and Swing fucntions.
※ The model HSC-1100H has a tilt sensor inside, so when the product is leaning,
the prdouct is Off automatically.
② FAN speed control (COOL mode only)
When the product operates first, the Fan speed is HIGH.
If you want to control the fan speed, push FAN button and you can select HIGH/ LOW.
③ Off Timer
The Off timer fuction can be set only when the product is On.
The set time is shown as below LED light.
1hr : ¤ ● ● ●
2hr : ¤ ¤ ● ●
3hr : ¤ ¤ ¤ ●
4hr : ¤ ¤ ¤ ¤
Off timer sets and by passing 1hr, the LED is Off from left end one by one.
For example, after set 3hr, if 1hr is passed, the status of LED is as below.
¤ ¤ ¤ ●
(At the first time : 3hr)
If the set time is pased all, the operation is stop.
④ Swing of Duct (COOL mode only)
If you push the SWING button, the duct for cold air moves right and left,
and puch the button again, it's stop.
⑤ Operation mode change
When the product is Off, if you push MODE button for 5sec. the operation mode is changed.
(COOL mode ↔ HEAT mode)
⑥ Water full (only in COOL mode)
Drain water bucket can be filled with drawin water. At that time, the compressor operation is
Off automatically. Take the water bucket out, and throw away the drain water and
place the water bucket at the original palce and use air conditioner.
②
③
¤ ¤ ● ●
→
(after passing 1hr)
⑥
④
⑤
11
Advertisement
