Table of Contents
Advertisement
SERVICING AND MAINTENANCE
Figure (6) Undo bulkhead/burner nut.
Figure (8) Remove sparker cover from front of
burner and then gently remove burner taking
care not to move the sparker/sensor.
Figure (10) To remove the remote control
module, remove screw from lid, remove lid
and disconnect wiring, the module can then
be removed.
12
(continued)
Figure (7) Remove holding screws from each
side of burner.
Figure (9) Remove front protection mesh by
removing screws.
Figure (11) To remove control module firstly
remove the rectifier
Hide quick links:
Advertisement
Table of Contents
