Installing the appliance
^ Open both appliance doors and
remove the large freezer basket from
the freezer zone.
^ Screw the attachment plate lugs m to
the adjacent furniture/fixtures.
With side-by-side combinations, only
the external side of the appliances can
be secured to the niche.
Now connect the water supply to the
appliance (see "Plumbing").
68
Preparing the custom door
For best results, it is important to
mount the upper door before the
lower door.
^ Open the appliance door.
^ Unscrew the installation supports n
from the appliance door.
^ Loosen the remaining screws from
the strips o on each side of the door,
then remove.
^ Set aside the screws and side strips
o - you will need them again later.
^ Remove the light switch cover (see
arrow).