Miele KF 1801 Vi Operating And Installation Instructions page 71

^ Align the custom door with the
double-threaded bolts.
^ Tighten the nuts on the adjusting rail.
This will correct the side alignment of
the door.
^ Put the side strips o back into place
and screw them completely down on
both sides of the appliance door.
Bag E contains spare screws for this
purpose.
^ Align the custom door again as
needed and tighten all screws on the
sides.
To mount the custom door on the
lower appliance door, simply repeat
the steps under "Preparing the
custom door".
^ The position of the lower furniture
door depends on the position of the
upper door.
Installing the appliance
^ Measure the distance Y between the
adjusting rail from the lower door and
the upper door.
^ Be sure to leave a distance of
(3 mm) from the upper cabinetry door.
1
/ "
8
71