Menu Items - Samsung HG28NC690 Installation Manual

690 series
Table of Contents

Advertisement

Menu Items

¦
To Enter this menu: Press the
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Hotel TV Function
Category
Hospitality Mode
Hospitality Mode
SI Vendor
Power On Channel
Power On Channel
Power On Channel
Power On Volume
Power On
Power On Volume
Power On Source
Power On Option
Channel Setup
Channel Editor
Channel
Channel Bank
MUTE
→ 1 → 1 → 9 →
Item
initial value
Standalone
SI Vendor
OFF
Last Saved
...
Num
...
Type
Last Saved
...
Num
Min Volume
0
Max Volume
100
TV
Last Option
...
...
Editor
Dynamic SI
OFF
ENTER
buttons in order.
Description
Select Hospitality mode.
• Interactive mode : TV works with an SI STB or SBB.
• Standalone mode : TV works alone, without an SI STB or SBB.
• Interactive mode : Samsung / OCC / MTI / Nstreams / NXTV / Enseo / Cardi-
nal / Guestek / Seachange / EBL
• Standalone mode : OFF / Smoovie
Set the default values that will be applied when the TV is turned.
• User Defined : Lets you set Power On Channel and Channel Type manually.
See Power On Channel and Channel Type below.
• Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
When the TV is turned on, it switches automatically to this channel.
• Select channel band : AIR (analog air band), DTV (digital air band), CATV
(analog cable band), CDTV (digital cable band).
• User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
• Last Saved : When the TV is turned on, it returns to the volume that had been
set when the power had been turned off.
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
The maximum Volume Level the user in Stand Alone Hospitality mode.
Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you
have unplugged the TV and then plugged it in again.
• LAST OPT : Returns to its last Power state. If it was in Stand-by, it returns to
Standby. If it was on, it turns on.
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu functions on
the user Channel menu such as Auto Program, Antenna selection, etc.
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your
desired channel number order.
• Apply the video mute to channels you select. The video mute blanks out
the video from a channel and outputs only the sound while displaying a
speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily,
without your having to display each channel directly.
If you set Hospitality Mode to Standalone and SI Vendor to Smoovie, this item is
displayed. Lets you edit the channel bank that works with the Smoovie Remote.
Refer to page 38.
• On : Check the DTV Program channel number. (If Dynamic SI is On, it is
not availale to edit DTV channels in Channel Editor.)
• Off : Does not check the DTV Program channel number. (If Dynamic SI
is Off, it is available to edit DTV channels in Channel Editor,but additional
DTV channel program number update is not supported.)
23
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hg32nc690Hg40nc690Hg48nc690Hg55nc690

Table of Contents