Samsung HG28NC690 Installation Manual page 25

Hotel TV Function
Category
Sub Amp Mode
Bathroom Speaker
Sub Amp Volume
Eco Solution Energy Saving
Welcome
Message
Edit Welcome
Message
Hospitality Logo
Logo/Message
Hospitality Logo
Logo Display Time
Clone TV to USB
Clone USB to TV
Cloning
Setting Auto
REACH 3.0
REACH 2.0
REACH Channel
Group ID
IPG Room Type
REACH Server
REACH Update
REACH Update
Immediate
Room Number
REACH 2.0 TV
REACH 2.0 Server
Network Setup
SmartHub Model
Network
SmartHub Setting
Item initial value
2
6
Off
OFF
OFF
...
DL
...
OFF
Intialize
OFF
OFF
...
All
Default
TICKER OFF
1hour
Time
OFF
...
ON
Sound
...
Version
Setting
Description
Determines the Bathroom Speaker sound AMP operation mode.
• 0: Turns the Bathroom Speaker sound AMP function off (PWM off).
• 1 : The Bathroom Speaker sound volume follows the TV speaker sound volume
identically. The Bathroom Speaker sound volume is controlled by the TV remote
or panel keys.
• 2: The Bathroom Speaker sound volume is controlled by the Batroom Speaker
volume controller.
The initial Bathroom Speaker sound volume after TV is turned on.
Adjusts the brightness of the TV to reduce power consumption.
• Off: Turns off the energy saving function.
• Low: Sets the TV to low energy saving mode.
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
Displays a the Welcome Message for 5 seconds when the TV turns On.
Edits the Welcome Message.
Turns the Hospitality logo feature On or Off, If On, when the TV is turned on, the
Logo is displayed, before the signal from the initial source, for the amount of time
set in "Logo Display Time".
Downloads the Hospitality logo.
Hospitality logo file requirements:
• BMP or AVI files only.
• Max file size : BMP - 960 X 540. AVI - 30MB.
• The file can only be named samsung.bmp or samsung.avi.
Hospitality Logo Display Time (3/5/7 seconds).
Clone the current TV options to a USB memory device.
Clone the saved TV options on a USB memory device to the TV.
If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV
menu items are restored again to their values cloned initially. See page 34.
• ON : The feature of REACH 3.0 in this TV becomes available.
• OFF : The feature of REACH 3.0 in this TV becomes not available.
• ON : The feature of REACH 2.0 in this TV becomes available.
• OFF : The feature of REACH 2.0 in this TV becomes not available.
Assign a DTV channel number to carry the update REACH data. This channel
number must be the same as the number set on the Reach server.
Select the group ID of the REACH server. (Refer to the REACH server manual for
more details)
Selects the IPG room type of the REACH server. (Refer to the REACH server
manual for the more information.)
• On : The TICKER content is displayed.
• Off : The TICKER content is not displayed.
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH
contents is downloaded from the REACH server to the TV :
• 1hour : Every hour
• 2hour : Every 2 hours
• 12:00 am : every 12:00 a.m.
• 12:00 pm : every 12:00 p.m.
• 2:00 pm : every 2:00 p.m.
• On : Whenever the TV enters standby mode (the power cord is plugged in
and the power is off), the REACH data is updated on the TV.
• Off : The REACH data is only updated on the TV at the REACH server update time.
set the room number
• ON : Soud set in the REACH 2.0 menu is outputted.
• OFF : Soud set in the REACH 2.0 menu is mute.
The version of REACH 2.0 is displayed.
if this item is entered into, network setup menu is displayed. The network setup
menu is used for setting network like access internet.
Set SmartHub Model.
Set up SmartHub.
25
English