Setting The Speaker Mode - Samsung HT-Z320 User Manual

system setup
DivX (R) Registration
Please use the Registration code to register this player with the DivX (R) video on demand format.
To learn more, go to www.divx.com/vod.

SETTING THE SPEAKER MODE

Signal outputs and frequency responses from the speakers will
automatically be adjusted according to your speaker configuration
and whether certain speakers are used or not.
1. In Stop mode, press the
2. Press the Cursor
ENTER button.
3. In the SPEAKER SETUP, press the ENTER button again.
4. Press the Cursor
speaker and then press the ENTER button.
For C, SL, and SR, each time the button is pressed, the mode switches
alternately as follows : SMALL ➞ NONE.
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speaker is connected.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
M

Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 63).
58
MENU button.
▼ button to move to Audio and then press the
, , , button to move to the desired
MOVE ENTER RETURN EXIT
MOVE CHANGE EXIT
RETURN