radio
LISTENING TO RADIO
Remote Control
1.
Press the
TUNER button to select the FM band.
2.
Tune in to the desired station.
Automatic Tuning 1 : When the #,$ button is
pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the , , .
button to automatically search for active
broadcasting stations.
Manual Tuning : Briefly press the , , . button to
increase or decrease the frequency incrementally.
Main Unit
1.
Press the
FUNCTION button to select the FM band.
2.
Select a broadcast station
Automatic Tuning 1 : Press the STOP
button to select the preset station.
Automatic Tuning 2 : Press the STOP
the #,$ button to automatically search the band.
Manual Tuning : Press the STOP
the
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches between STEREO and MONO.
In a poor reception area, select MONO for a clear, interference-free broadcast.
PRESETTING STATIONS
Example : Presetting FM 89.10 in the memory
1.
Press the
TUNER button to select the FM band.
, , . button to select 89.10.
2.
Press the
3.
Press the
TUNER MEMORY button.
#,$ button to select a preset number.
4.
Press the
You can select between presets 1 and 15.
5. Press the TUNER MEMORY button again.
6. To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the
#,$ button on the remote control to select
a channel.
66
.
( )
( )
button to select MANUAL and then briefly press
( )
button to tune in to a lower or higher frequency.
button to select PRESET and then press the #,$
button to select MANUAL and then press and hold